Restore your outdoor space with professional screen repair in Orlando, FL. We replace torn, loose, and weather-damaged screens on pool enclosures, patios, lanais, and porches. From single panel fixes to full rescreening, we keep your enclosure secure, clean, and bug-free.
Orlando Screening provides professional screen repair throughout Orlando, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 407-604-2234 or request your free quote.
Practical Screen Repair for Orlando Homes
Screens take a beating in Orlando. Sun, humidity, pool chemicals, and afternoon storms all wear them out faster than most homeowners expect. At Orlando Screening, our screen repair service focuses on fixing what is damaged without pushing you to replace what still has life left in it.
When we arrive, we start with a walkaround inspection of your enclosure or window screens. We look for more than just the obvious tear. We check spline channels, frame corners, door closers, kick plates, anchor points at the deck or concrete, and any loose fasteners. In Central Florida, wind-driven rain and UV can weaken a screen long before it rips, so we look for brittleness, stretching, and chalky fabric that shows the mesh is aging.
Once we know what is going on, we explain what can be repaired and what should be replaced, in plain language. Many customers only need a few panels rescreened, a door adjusted, or a handful of rusted screws swapped out. Others, especially older pool cages from the early 2000s, may need a partial rescreen where we replace the worst sections now and plan the rest for a later date to spread out the cost. Orlando Screening is set up for both small repairs and larger phased projects so you do not have to do everything at once unless you choose to.
How Our Screen Repair Process Works
Our repair process is simple and structured so you know what is happening at each step.
1) Assessment and quote: We measure each damaged panel, check access points, and note any framing problems. For pool enclosures, we often need ladder work to reach upper panels, especially on two-story homes common around Lake Nona, Hunter's Creek, and the Conway area. We factor that in from the start so there are no surprises. You get a written quote that clearly lists how many panels we are repairing, what mesh we are using, and any hardware or frame work.
2) Removing damaged screen and spline: We remove the old spline (the rubber cord that holds the screen in the frame) and cut out the damaged mesh. If your enclosure was built years ago, the spline may have hardened or shrunk. In those cases we replace it with new spline of the correct diameter. This is important in our climate because undersized spline will slip during heavy storms.
3) Installing new mesh: We roll the new screen into the frame using a spline roller, keeping even tension across the panel. For wide spans around lanais and pool cages, we use specific tensioning techniques so the screen stays tight but does not overstress the aluminum members. Corners are tucked and trimmed neatly so there are no gaps for insects or debris.
4) Hardware and door adjustments: While we are on site, we typically inspect screen doors, latches, and hinges. In Orlando, door frames can shift slightly on concrete decks, especially around older pools. We often need to square the door, adjust the closer, and replace worn bug sweeps along the bottom. This sort of work is usually included with a repair visit when we are already there.
5) Cleanup and review: When we finish, we clean up all screen scraps, old spline, and fasteners, then walk the enclosure with you so you can see every repaired area. You should not have to sweep up behind us or guess what was done.
Mesh and Material Options That Make Sense in Orlando
Not every screen mesh is the same, and choosing the right one matters more in Orlando because of the intense sun, frequent storms, and year-round bugs. Orlando Screening carries several mesh types that we use most often for repairs, and we will recommend one based on how you use the space.
Standard fiberglass screen: This is the most common and usually the most affordable option. It is flexible, does not dent, and works well for basic insect control on windows, patios, and many pool enclosures. In our area, basic fiberglass typically lasts 7 to 10 years, shorter if it faces direct south or west with no shade.
Upgraded polyester or high-strength mesh: For pool cages with wide spans, homes near golf courses, or families with pets that lean and scratch, we often recommend a stronger mesh. It costs more up front but holds tension better and resists stretching and tearing. In the Orlando sun, quality polyester screen can outlast standard fiberglass by several years, which often makes it a better value over time.
Florida-approved “No See Um” mesh: Around wetlands, retention ponds, or wooded lots, customers in places like Avalon Park or near Shingle Creek often complain about tiny midges that get through normal screens. For those yards, we can repair using a finer mesh that blocks these small insects. This mesh slightly reduces airflow, so we usually use it selectively, such as on seating areas or bedroom windows where it is most needed.
Hardware and frame considerations: During repairs we also pay attention to fasteners and frame coatings. Rusted screws on enclosures close to pools or the coast can stain the aluminum and weaken attachment points. When needed, we swap in stainless or coated fasteners that hold up better in Central Florida humidity and chlorinated pool environments.
What Drives Screen Repair Cost in Orlando
Customers often ask why two neighbors pay different prices for what looks like the same type of screen repair. The real cost drivers are not just the number of holes. Several local factors matter, and Orlando Screening is straightforward about how we price the work.
Size, access, and height: Larger panels take more material and time. Upper-story and roof panels, which are common on two-story pool cages in communities like Dr. Phillips and Waterford Lakes, mean ladder or roof work and extra safety steps. Those repairs simply take longer and may require two technicians.
Mesh type and upgrade choices: Basic fiberglass is the lowest cost. Pet-resistant or No See Um mesh add cost but can reduce future repairs. When we quote, we break out each mesh option so you can see the difference in both price and expected lifespan for our climate.
Condition of frames and fasteners: If the aluminum framing is bent, separated, or pulling away from the deck, we may need to add minor framing repairs or bracing before rescreening. There is no benefit in installing new screen into a weak frame that will shift in the next thunderstorm. We will point out any such issues and list them separately on your estimate.
Scope of work: A house with one damaged lanai panel and a patio door rescreen is priced differently from a pool cage that needs 20 panels. The more panels we do at once, the lower the per-panel cost usually becomes because setup time is spread across more work. We are transparent about this so you can decide whether to fix only the urgent damage or tackle additional aging panels while we are there.
Urgency and scheduling: Most repairs are scheduled within normal working hours, which keeps costs predictable. After major wind events or hurricanes, demand spikes and access can be trickier, but we still base our pricing on the same factors and explain any temporary adjustments tied to material costs or emergency access.
When to Repair, When to Rescreen, and How to Prepare
Not every problem means you need a full rescreen. For many Orlando homeowners, small repairs extend the life of an enclosure by several years. Orlando Screening generally recommends repair when most of the mesh still has flexibility, the color is relatively uniform, and the rips are limited to a few panels or storm-damaged sections.
You might want to plan for a larger rescreen if you see multiple signs of age, like screens that turn white or gray when you touch them, widespread bowing or sagging panels, brittle edges that crack while you clean them, or a lot of tiny pinholes that let in gnats. In that situation, patching one or two areas will not prevent future failures. We will tell you honestly if you are at that point and give you both a repair and full rescreen estimate so you can decide.
Before we arrive, basic preparation helps us work faster. Move patio furniture, grills, and potted plants a few feet away from the enclosure walls if you can. If you have pets, plan to keep them inside or in another area while panels are out, since there will be temporary openings. For higher panels, we may ask about attic access or interior stairs if we need to reach clerestory or second-floor window screens from inside.
Many Orlando residents also ask about permitting. Simple screen repairs and like-for-like panel replacements do not typically require a permit in most local jurisdictions, including the City of Orlando and Orange County. Structural changes to the enclosure are different, and if we ever recommend that kind of work we explain the permit requirements clearly.
Our goal at Orlando Screening is to give you a practical screen repair plan that fits your budget and the way you actually use your patio, pool, or porch, so you can keep enjoying outdoor living without constant bug problems or torn panels.
